The number of people using custom aquariums over the years has increased considerably. This can to a large extent be attributed to the fact that these tanks are very versatile, especially as concerns their shapes and sizes. Even more importantly, the cost of building them is much reduced as compared to buying those that are already constructed. Larger tanks are even much cheaper. There however will be need for proper planning to ensure the construction is of high quality. In getting to build custom aquariums Austin residents can benefit from certain useful tips.
When the custom tank is poorly built, it could cause considerable damage to property and even people. This is especially so when they break or develop leaks. When building the tanks, the main materials needed are glass panels, a glass cutter and aquarium silicone. The glass cutter will only be needed in the event that one is planning to cut the glass on their own. Otherwise, it will have no use.
It is very important to first make a final decision on the dimensions of the aquarium. This will go a long way in helping to determine the thickness of glass required as well as the number of support braces that will need to be used. The majority of aquariums are less than 4 feet in length, with a height of 24 inches. The thickness of glass is normally 6mm, with a single central support.
If on the other hand one wants a tank that has bigger dimensions, glass thickness would need to be increased to 10 or 12 mm. In such cases, a support braced should be placed for every 3 feet to ensure the aquarium does not bow. The glasses used are measured and cut from the sides. A better option would be to have the cutting done from the supplier for better accuracy.
The project plans need to be explained to the person that is doing the cutting. At the same time, it should be stressed to them that the cuts need to be clean and exact. This is because even missing the measurements by a few millimeters could end up compromising the integrity of the aquarium. The cut pieces should be arranged on a large flat surface, preferably in the order in which they will be assembled.
A bead of silicone is then run all through the bottom panel which is cut. Inasmuch as some silicone should be placed at the entire bottom panel of glass, this needs to only be done on the sides of each panel. One then stands the panels quickly as the sides which are beaded are pressed together. The pressing ensures that no bubbling occurs. This task is easily done by at least two people.
What follows is joining of the four sides against the cut edges. Each of the sides of the tank should be duct raped in place. There is attachment of the support braces through the use of silicone. For them to fit well inside the tank, the supports are glued together. The tank is used 48 hours after it has been built.
In designing custom aquariums Austin residents should look at the benefits involved. It is a creative and relaxing experience for the individual and their family. The tank will feel like part of the home rather than an accessory.
When the custom tank is poorly built, it could cause considerable damage to property and even people. This is especially so when they break or develop leaks. When building the tanks, the main materials needed are glass panels, a glass cutter and aquarium silicone. The glass cutter will only be needed in the event that one is planning to cut the glass on their own. Otherwise, it will have no use.
It is very important to first make a final decision on the dimensions of the aquarium. This will go a long way in helping to determine the thickness of glass required as well as the number of support braces that will need to be used. The majority of aquariums are less than 4 feet in length, with a height of 24 inches. The thickness of glass is normally 6mm, with a single central support.
If on the other hand one wants a tank that has bigger dimensions, glass thickness would need to be increased to 10 or 12 mm. In such cases, a support braced should be placed for every 3 feet to ensure the aquarium does not bow. The glasses used are measured and cut from the sides. A better option would be to have the cutting done from the supplier for better accuracy.
The project plans need to be explained to the person that is doing the cutting. At the same time, it should be stressed to them that the cuts need to be clean and exact. This is because even missing the measurements by a few millimeters could end up compromising the integrity of the aquarium. The cut pieces should be arranged on a large flat surface, preferably in the order in which they will be assembled.
A bead of silicone is then run all through the bottom panel which is cut. Inasmuch as some silicone should be placed at the entire bottom panel of glass, this needs to only be done on the sides of each panel. One then stands the panels quickly as the sides which are beaded are pressed together. The pressing ensures that no bubbling occurs. This task is easily done by at least two people.
What follows is joining of the four sides against the cut edges. Each of the sides of the tank should be duct raped in place. There is attachment of the support braces through the use of silicone. For them to fit well inside the tank, the supports are glued together. The tank is used 48 hours after it has been built.
In designing custom aquariums Austin residents should look at the benefits involved. It is a creative and relaxing experience for the individual and their family. The tank will feel like part of the home rather than an accessory.
About the Author:
For bigger savings on custom aquariums Austin fish lovers can visit our website right here at www.fishwhisper.com. You can also see further details about our products on http://www.fishwhisper.com now.
0 comments:
Post a Comment